Plumbing Fittings

A: Our MOQ is usually 5 CTNS.

A: For plumbing or household water supply, PVC pipes are typically rated to handle a maximum pressure of around 100 to 150 pounds per square inch (psi). It's crucial to adhere to local building codes and manufacturer specifications to ensure safe and proper installation.

A: You can contact us with Trade Manager or send us an email by click Contact Supplier bottom.

A: The constant rocking will likely break the wax seal (located between the toilet and the flange), allowing water to leak onto the substrate and the ceiling below when the toilet is flushed.

A: We ship the goods via Ningbo or Shanghai port.

A: A malleable gasket that could be hard or soft is inserted between the flanges to prevent leaks. Pressure is applied to the gasket by bolting or using a clamp to compress the gasket firmly at a place. The gaskets are made with different materials and can be selected per the process's temperature and characteristics.

A: Like SDR pres- sure pipe (see page A-24) Schedule 40 has a built-in long term pressure safety factor of 2 to 1. However, unlike SDR pressure pipe which has a specific pressure rating in all sizes, Schedule 40's maximum pressure rating (figured at 72.4°F) varies with each size (see Pipe Selection Chart on A-36).

A: Our company is located in the Zhejiang Jiangshan No. 99-11, Jiangjialong Natural Village, Pengli Village, Hushan Street Provice. If you would like to have a visit, you are much welcome.

A: 150 psi
Pressure Rating
150 psi, water at 73°F.

A: The time of delievery is around 30-45days.

A: Class 150. If the temperature for Class 1 150# flange is < 100 degrees Fahrenheit, the maximum pressure for flanges is 285 psi. If the temperature for Class 1 150# flange is 200 degrees Fahrenheit, the maximum pressure for flanges is 260 psi.